Guillows Spirit of Saint Louis build

Ask other modelers for a little help / knowledge ?

Guillows Spirit of Saint Louis build

Postby ADW 123 » Wed Sep 08, 2010 7:04 am

Ive been working on this for about half a month. its coming along nicly. any comments? also, i was wondering if anyone can tell me tips on cutting out small plastic parts like the piston heads on this plane.

[img]Tienen%20monedas%20y%20billetes.%20Los%20billetes%20son%20de%20denominaciones[/img]
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby ADW 123 » Wed Sep 08, 2010 7:25 am

sorry, here it is
Image
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby flash52 » Wed Sep 08, 2010 3:20 pm

I use a sanding block and sand the back side of the plastic sheet. When it gets thin enough the plastic parts are real easy to remove.

Flash
flash52
 
Posts: 67
Joined: Tue Mar 10, 2009 5:31 pm
Location: Wichita,KS

Postby ADW 123 » Wed Sep 08, 2010 3:43 pm

and this method will work well if i am cutting out parts like the piston heads? they are a pain to make good and they have to be perfectly even otherwise it looks dumb.
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby ADW 123 » Thu Sep 09, 2010 7:24 pm

has anyone built this one? i have been having big troubles with the wing strut caps, and how the pistons are to attach to the nose, and details on the pistons. the directions do not explain this very well at all. can anyone help?
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby ADW 123 » Sat Sep 11, 2010 7:04 am

heres an update

Image

Image

Image

Image

Image

Image

Image

Image

Image
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby jim » Sat Sep 11, 2010 7:54 am

looking good love the working door is that on the plans or your creation
jim
 
Posts: 47
Joined: Sun Jan 10, 2010 2:25 pm
Location: england hull

Postby ADW 123 » Sat Sep 11, 2010 9:09 am

on the plans. not bad so far for a 14 year old
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby BillParker » Sat Sep 11, 2010 10:08 am

awww well, that explains it. I thought you were 13...

:twisted:

Nice work, sir! Stay with it.


bp
William H. Parker Jr. (Bill Parker)
President, Parker Information Resources
http://www.parkerinfo.com/ap.htm bparker@parkerinfo.com
BillParker
 
Posts: 1031
Joined: Sat Jan 19, 2008 1:21 pm
Location: Houston, Texas

Postby Phugoid » Sat Sep 11, 2010 10:20 am

Here! Here! to Bill's comments

Andrew
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am

Postby ADW 123 » Sat Sep 11, 2010 10:37 am

i turned 14 over the summer 8) i got an airbrush and compresor recently, and just today got some paint. i think if i practice a little before i paint the spirit i can make it look real good.
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby ADW 123 » Sat Sep 11, 2010 1:22 pm

Image

Image

Image

Image

to be honest, im a little dissopointed with the way the paint turned out. i dont think it looks so great
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby cliffm » Sat Sep 11, 2010 9:13 pm

I heard somewhere that patience is a virtue and I always thought women were the only ones who had that. So, a lot of my basic beliefs have been shattered, because slowly at the 61st year of my existence I'm getting some. Patience, is very slowly creeping into my general practices when working on my models. Although my current model is suffering some very saggy tissue on the fuselage because I didn't wait to let it dry thoroughly between coats. I like to compare model building with billiards or guitar, when you mess up it's usually very noticeable. The last plane I used silver on I experimented mixing a little bit of white in it and the results were'nt too bad. You'll find the airbrush very non-forgiving when it comes to ill-prepared surfaces. Hang in there, you're doing great.
cliffm
 
Posts: 370
Joined: Fri Feb 27, 2009 11:08 am
Location: fairdale N D

Postby ADW 123 » Sat Sep 11, 2010 9:55 pm

it seems very easy to mess up when im airbrushing this.... its my first time :oops:
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby dbcisco » Sat Sep 11, 2010 11:50 pm

I think you did a wonderful job. Don't beat yourself up. Yours is better than some I did.
A bumblebee isn't supposed to fly but does.
My plane is supposed to fly but doesn't.
Balances out doesn't it : )
dbcisco
 
Posts: 209
Joined: Fri May 30, 2008 8:34 am
Location: Lansdale, PA

Next

Return to General Building Questions

Who is online

Users browsing this forum: No registered users and 10 guests