Wid's Cessna 150 FF

Ask other modelers for a little help / knowledge ?

Wid's Cessna 150 FF

Postby WIDDOG » Tue Nov 25, 2014 6:54 pm

I ordered a Guillow's Kit 309 Cessna 150 Laser Cut this evening. When it arrives I will build it for rubber powered FF. This will be my first model with a wing span over 18 inches.
This youtube video motivated me to order the kit. http://youtu.be/Toh845PYRhw.
WIDDOG
 
Posts: 872
Joined: Tue Aug 25, 2009 5:34 am
Location: West Virginia USA

Re: Wid's Cessna 150 FF

Postby WIDDOG » Fri Nov 28, 2014 5:40 pm

I have heard a lot of good things about the Guillow's Laser Cut kit wood. I was wondering if I built mine with kit wood would it be light enough to fly well? What I'm basing this question on is in the above video it show's the model being built. I looked closely at the video and I could see parts numbers and tell that the model was being built with kit wood.
WIDDOG
 
Posts: 872
Joined: Tue Aug 25, 2009 5:34 am
Location: West Virginia USA

Re: Wid's Cessna 150 FF

Postby Wildpig » Fri Nov 28, 2014 11:04 pm

From the picture of the box it appears to be the die-cut version. That's the old box art. But the formers looked to be laser cut. The notches in the formers look very precise. I'm rather amazed at how well that model flew. Much better than I ever got the Guillow 150 to fly.
I think your Laser Cut model will do o.k. I would still try to reduce the weight as best I could without altering the overall appearance of the model.
Also, keep in mind how big of a rubber motor that guy had in his model.
Please post a build thread of your 150.
Wildpig
 
Posts: 529
Joined: Thu Jan 26, 2012 9:41 am

Re: Wid's Cessna 150 FF

Postby Bill Gaylord » Sat Nov 29, 2014 8:53 pm

Not surprised to see that result. As an r/c conversion, it has to be one of the easiest flying/stable models I've ever flown. Should be a good one for ff.
Bill Gaylord
 
Posts: 901
Joined: Sun Nov 09, 2008 1:29 pm
Location: Grove City PA

Re: Wid's Cessna 150 FF

Postby davidchoate » Sat Nov 29, 2014 11:06 pm

I love the 300 kits. They are very good Scale models, but I cant see one flying well on rubber. They are very sturdy and use mostly 3/32" wood. They are fine candidates for RC, or powered FF. I recently found out they make ESC's for control line planes which require no receiver. This is the best option to ff other than the cox glow engines on the plan.
davidchoate
 
Posts: 1263
Joined: Wed Aug 14, 2013 6:41 am
Location: PHiladelphia PA

Re: Wid's Cessna 150 FF

Postby WIDDOG » Sun Nov 30, 2014 7:03 am

David do you think I could get away with using 1/16 inch thick wood for the formers?
WIDDOG
 
Posts: 872
Joined: Tue Aug 25, 2009 5:34 am
Location: West Virginia USA

Re: Wid's Cessna 150 FF

Postby Bill Gaylord » Mon Dec 01, 2014 10:32 am

I wouldn't see why not, but in general you can easily find 3/32" that is as light as the average 1/16" that comes in kits. Makes it easier than trying to recalculate part dimensions for parts where the thickness is a concern.
Bill Gaylord
 
Posts: 901
Joined: Sun Nov 09, 2008 1:29 pm
Location: Grove City PA

Re: Wid's Cessna 150 FF

Postby WIDDOG » Sun Dec 07, 2014 8:21 am

I was able to start building on my Cessna today. I am very happy with the Laser Cut kit wood.

A= 8.5 lb/ft
B= 9.5
C= 7.8
D= 8.7

This kit has really turned me around as far as kit wood goes. I have to admit that this is a really nice kit.
WIDDOG
 
Posts: 872
Joined: Tue Aug 25, 2009 5:34 am
Location: West Virginia USA

Re: Wid's Cessna 150 FF

Postby WIDDOG » Mon Dec 15, 2014 8:41 am

Well I got the landing gear placed on the model. I'm not really that good with landing gear. I'm glad that it is on a functioning alright. Like I said before very nice kit.
WIDDOG
 
Posts: 872
Joined: Tue Aug 25, 2009 5:34 am
Location: West Virginia USA

Re: Wid's Cessna 150 FF

Postby Wildpig » Mon Dec 15, 2014 10:07 am

That's some nice wood in that kit. :)

I hate to say it but, your B2 Former is upside down.
Wildpig
 
Posts: 529
Joined: Thu Jan 26, 2012 9:41 am

Re: Wid's Cessna 150 FF

Postby WIDDOG » Mon Dec 15, 2014 10:28 am

Thanks Wildpig your correct again.

I am making correction repair now.

Image
WIDDOG
 
Posts: 872
Joined: Tue Aug 25, 2009 5:34 am
Location: West Virginia USA

Re: Wid's Cessna 150 FF

Postby WIDDOG » Wed Dec 17, 2014 1:40 pm

I was able to attach the windshields. Moving on with the build.

Image
WIDDOG
 
Posts: 872
Joined: Tue Aug 25, 2009 5:34 am
Location: West Virginia USA

Re: Wid's Cessna 150 FF

Postby John G Jedinak » Wed Dec 17, 2014 2:01 pm

Quite a task and impressive......WELL DONE!!!!
John G Jedinak
 
Posts: 119
Joined: Sun Nov 15, 2009 2:53 pm
Location: Ft. Wayne In.

Re: Wid's Cessna 150 FF

Postby WIDDOG » Thu Dec 18, 2014 10:07 am

Was able to finish the model. I had gotten in a couple backyard trim flights. I have no idea as to what size rubber to use.

Image
WIDDOG
 
Posts: 872
Joined: Tue Aug 25, 2009 5:34 am
Location: West Virginia USA

Re: Wid's Cessna 150 FF

Postby davidchoate » Thu Dec 18, 2014 2:52 pm

Looks nice. Whats your weight?
And as I learned. there is a much better kind of rubber called FAI. You gotta order it. I am not a FF expert, but have come a long way from the advice of guys like Mitch. In addition to the Fai rubber; I have found that using props made by Peck polymer will also help.
davidchoate
 
Posts: 1263
Joined: Wed Aug 14, 2013 6:41 am
Location: PHiladelphia PA

Next

Return to General Building Questions

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 5 guests