EZE Dope Question

Ask other modelers for a little help / knowledge ?

EZE Dope Question

Postby chip58123 » Sat Sep 27, 2014 7:00 pm

How many coats would you all recommend when doping an airplane with EZE Dope? I am building a Guillows Cessna 170.
chip58123
 
Posts: 3
Joined: Fri Jan 01, 2010 1:19 pm
Location: Bowling Green, KY

Re: EZE Dope Question

Postby WIDDOG » Sat Sep 27, 2014 7:35 pm

I am posting the EZE Dope youtube. http://youtu.be/I3SCSrhYrhw I found it interesting that they demonstrated on a Guillow's Skyraider model airplane.
WIDDOG
 
Posts: 872
Joined: Tue Aug 25, 2009 5:34 am
Location: West Virginia USA

Re: EZE Dope Question

Postby limey » Sun Sep 28, 2014 9:09 am

Hi chips I have used easy dope since returning to the hobby after many years .try looking on the RCA groups . Com website they have some interesting views on the subject there, are a couple of pictures on this website of models I have finished with an easy dope manufactured by an English company but the cost of postage would be inhibititive if you are not in the uk or Europe.hope this helps.
limey
 
Posts: 36
Joined: Mon Aug 06, 2012 7:51 am

Re: EZE Dope Question

Postby limey » Sun Sep 28, 2014 9:36 am

I think scigs30 who is a contributer to this forum may also help
limey
 
Posts: 36
Joined: Mon Aug 06, 2012 7:51 am

Re: EZE Dope Question

Postby tail spin » Sun Sep 28, 2014 11:32 am

Wouldn't mind giving Ezedope a try, But after using Elmers & the following disaster on the bench, I prefer standard dope minus the toxic cloud.
tail spin
 
Posts: 43
Joined: Tue Aug 26, 2014 12:43 pm

Re: EZE Dope Question

Postby chip58123 » Mon Sep 29, 2014 11:16 am

yes scigs30 and another person have a long thread on RC Groups about it. I posted the same question on hippocketbuilders and some one sent a link to it. It is a great thread and there is a lot to read, but they seem to figure out the best way to use it and seem to like it. Here is the link. http://www.rcgroups.com/forums/showthread.php?t=1920210.
chip58123
 
Posts: 3
Joined: Fri Jan 01, 2010 1:19 pm
Location: Bowling Green, KY

Re: EZE Dope Question

Postby tail spin » Mon Sep 29, 2014 3:33 pm

Thank you Chip for the link.
tail spin
 
Posts: 43
Joined: Tue Aug 26, 2014 12:43 pm

Re: EZE Dope Question

Postby scigs30 » Mon Sep 29, 2014 11:35 pm

I like it but trust me there is a learning curve so read my previous posts. IMO nothing beats regular dope, but Eze Dope is a good replacement. I am finishing up a old guillows Cessna 170 covered with silver tissue and brushed with Eze dope.
Here are my Eze dope builds
http://www.rcgroups.com/forums/showthread.php?t=2212450
http://www.virtualaerodrome.com/image_t ... aft_id=245
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Re: EZE Dope Question

Postby tail spin » Tue Sep 30, 2014 7:07 am

I have tried the white glue method once and that will be the last. I am convinced the tried & true dope is best But, should the EZedope become easily available in the states I will happy to give it a chance. My 50/50 white glue turned into a slop :(
tail spin
 
Posts: 43
Joined: Tue Aug 26, 2014 12:43 pm

Re: EZE Dope Question

Postby scigs30 » Tue Sep 30, 2014 11:18 am

What white glue method? I only use white glue to attach tissue and it works great.
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Re: EZE Dope Question

Postby John G Jedinak » Tue Sep 30, 2014 2:36 pm

Double that...i use the 50/50 white glue method for attaching tissue AND sealing. Works just fine for me AND no complaints from my Better Half!!
John G Jedinak
 
Posts: 119
Joined: Sun Nov 15, 2009 2:53 pm
Location: Ft. Wayne In.

Re: EZE Dope Question

Postby Bill Gaylord » Tue Sep 30, 2014 8:02 pm

Scigs has the key words here with this:
scigs30 wrote:I like it but trust me there is a learning curve...


In similar fashion I've heard a number of times about how people tried my favorite Microlite covering once, and balled it up and threw it into the trash saying never again. There's a reason they use the term master, in master modeling. That's because we have to master these skills. Without being a tissue covering type, if I did try it then I would assume that it would take me a while to master it, and the same goes for the different application methods. I know that my airbrush will not work if the percentage mix is something like 1% off. I literally have to add only 5 drops of thinner sometimes and it sprays fine. I would imagine the same is true with thinning white glue for covering use. People need to have more perseverance in mastering these skills, when it doesn't go as planned the first time.
Bill Gaylord
 
Posts: 901
Joined: Sun Nov 09, 2008 1:29 pm
Location: Grove City PA

Re: EZE Dope Question

Postby tail spin » Wed Oct 01, 2014 8:15 am

After thinking about my previous post on my white glue fiasco with plenty of thought of my post :oops: after the fact... The white glue wasn't the problem it was 100% operator error. In time I am sure I will be able to master the technique applying the tissue to the freshly glued surface. I think my first mistake was NOT allowing "tack time" before applying tissue was the culprit and obviously being sloppy & uninformed about the procedure was the cause. I do like the results of dope but moving forward into a less toxic build being my 3 grandsons wish to join in on a build white glue 50/50 H2O or less H2O maybe a 60/40
mix "AKA" Matt medium would be more appropriate for their use. AS the mans prayer goes ; "I am a man I can change if I have too, I guess" :wink:
Build on!
tail spin
 
Posts: 43
Joined: Tue Aug 26, 2014 12:43 pm

Re: EZE Dope Question

Postby Brenda » Wed Oct 01, 2014 8:25 am

tail spin wrote: "I am a man I can change if I have too, I guess" :wink:
Build on!

You watch Red Green? Nice!
Brenda
 
Posts: 120
Joined: Wed Aug 20, 2014 1:02 pm

Re: EZE Dope Question

Postby tail spin » Wed Oct 01, 2014 9:44 am

Brenda YES! Actually met Steve Smith in person. Super nice guy.
tail spin
 
Posts: 43
Joined: Tue Aug 26, 2014 12:43 pm

Next

Return to General Building Questions

Who is online

Users browsing this forum: Bing [Bot] and 6 guests