CloudBuster and Flyboy - an evolutionary experience.

Ask other modelers for a little help / knowledge ?

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Wed Mar 21, 2012 10:56 pm

After a couple rainy days of preparing & filing our IRS forms we decided to take a modeling break. A few minor repairs in progress. Repair of the super CloudBuster tail, modifying the wing mounting rails on the Javelin wing to allow it to be fitted to the Lancer, and patching one of the FlyBoy wings.
SC_03-21-12aM.JPG

As soon as the super CloudBuster tail repair was dry, we took it out for a test flight. Flies great.
SC_03-21-12 dM.JPG

SC_03-21-12d2.jpg
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Mon Mar 26, 2012 12:04 am

On the day that we were flying the super CloudBuster, we also flew the CloudBuster #2 wing and tail mated to the long stick fuselage normally used with the FlyBoy wing. The CB#2 wing and long stick combination proved to be a good and stable flyer.
SC_03-21-12e2e2M.JPG

This lured us into flying in twilight conditions and we misjudged the location of a tree bordering our flying field with this result.
SC_03-24-12aN.JPG

The damaged leading edge was quickly and easily repaired.
SC_03-24-12a2N.JPG

In my experience, the robust structure of the Guillows models, together with some simple modifications results in airplanes that absorb a lot of wear and tear and are easy to repair.
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Mon Mar 26, 2012 12:12 am

The CloudBuster #2 wing and tail return to flight with their own fuselage.
SC_03-24-12b.JPG
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Sat Apr 14, 2012 10:41 am

In the Comet 4 in 1 kit from which we built the first CloudBuster and FlyBoy was a kit for the GoldWing. We've decided to modify it to swing control.
SC_12-20-11GW1.jpg

First we increased the height of the forward fuselage,
SC_12-20-11GW2.jpg

and reshaped the vertical tail and cut apart the all sheet wing to rebuild it as a stick and tissue wing.
SC_01-01-12GW3.JPG
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Sun Apr 15, 2012 11:03 pm

The modified wing framed up. 3/32 leading edge with 3/32 ribs and 1/16 trailing edge. A center section is provided to which the strips needed for the removable wing will be attached. Vertical tail is attached to the fuselage.
SC_04-14-12GW4.JPG

Wing dihedral is formed.
SC_04-15-12GW5.JPG
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Fri Apr 20, 2012 1:30 am

We attached the platforms for the removable wing and horizontal tail. These are of a standardized size for the models in the 12inch wingspan range. 3/8 inch wide platform at the tail and 5/8 inch wide at the wing.
SC_04-18-12GW6.JPG

At this point, we were eager to try a test flight with the new fuselage and attached the old Boom-Boom wing and gave it a go. It was a bit breezy and we lost track of the model for a moment and managed to swing the pole tip thru the wing slicing off the tip. :(
SC_04-18-12GW7.JPG
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Fri Apr 20, 2012 1:36 am

The GoldWing with its modified wing.
SC_04-18-12GW8.JPG

Wing covered with tissue. Wing span is 12 inches.
SC_04-19-12GW9.JPG

It will be flying soon.
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Sat Apr 21, 2012 9:43 pm

The GoldWing is ready to fly and the Boom-Boom wing is repaired and also ready.
SC_04-20-12GW10.JPG

Yesterday, just prior to a fast advancing cold front and T-showers, we were able to make a few test flights.
SC_04-20-12GW11.JPG

SC_04-20-12GW12.JPG
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Sat Apr 21, 2012 9:45 pm

Also, had a chance to fly Boom-Boom.
SC_04-20-12BB1.JPG

SC_04-20-12BB2.JPG
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Sun Apr 22, 2012 10:36 pm

Today was a beautiful day for flying. No clouds and breezes 0 to 10 mph, much better than our last session on friday. We decided to fly at the school yard a few blocks away, since it was the weekend. With the availability of a larger area, we cut a longer swing line- 25 feet. The longest line that we have used for swing control so far. The flight session went well. The models flew well and was an interesting experience. And a bit challenging when breezes would reach 10 mph. Here are a couple of pix of the Gold Wing glider. Kinda impressive for a 12 inch span model on the end of 37 ft pole/line length, As a teenager we used to fly a 42 inch Ring Master on 52 ft lines. Comparing the wing spans, the scale effect would be of flying a model on lines over 100 ft long.
SC_04-22-12GW13.JPG

SC_04-22-12GW14.jpg
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Sun Apr 22, 2012 10:47 pm

Also flew the stick fuselage FlyBoy.
SC_04-22-12b.JPG

And a couple versions of the 'super CloudBuster'.
SC_04-22-12a.JPG

SC_04-22-12c.JPG
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Mon Apr 23, 2012 3:46 pm

One more observation about yesterday's flying session in the park. The longer line and larger flying area allowed the model to take longer to complete a lap and allowed me to walk around in a small circle in the center of the circular flight path. This allowed me to follow along with the model while swinging it at low altitude for a few laps. This reduced the onset of dizziness while flying. A very similar experience to the controline model flying that we did as a youngster.
SC_04-22-12c2.JPG
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Mon Apr 23, 2012 3:53 pm

The great weather is still with us and today we were in our back yard flying a few of the 'swingers'. A couple of pix of the FlyBoy wing mated to the Droop Snoot fuselage and tail.
SC_04-23-12a.JPG

SC_04-23-12b.jpg
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Mon Apr 23, 2012 4:00 pm

The variable breezes are also with us and while competing with some sudden gusty air we managed to collide with the tool shed once again. Minor damage encountered.
SC_04-23-12d1.JPG

The repair is quick and easy, and the wing will be flying soon.
SC_04-23-12d2.JPG
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Fri Apr 27, 2012 12:16 am

After mowing the grass in the back yard, we took a break to do some late afternoon flying. In the growing darkness, we misjudged the distance of one of the trees bordering the backyard and flew the FlyBoy #3 into one of the limbs and took off the outboard tip. Fortunately, the damage is not too severe. The rugged construction of the FlyBoy wing once again proved its value. The damage was confined to a broken leading edge and torn tissue. The wing should be ready to fly in a few days.
SC_04-26-12a.JPG

Even with the outboard tip missing, the FlyBoy is still capable of tether flight.
SC_04-26-12b1.JPG

SC_04-26-12b2.JPG
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

PreviousNext

Return to General Building Questions

Who is online

Users browsing this forum: No registered users and 9 guests