CloudBuster and Flyboy - an evolutionary experience.

Ask other modelers for a little help / knowledge ?

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Thu Mar 01, 2018 10:42 pm

Seeing a couple of comments about the Goldwing glider on this forum currently, we decided to share our experiences with the glider. It is a simple to build model and flies well in our backyard via swing control and is fun to modify into a variety of fine flying craft. We had the opportunity of obtaining 2 GWs in a couple of Comet Bilf-N-Fly kits a while back for super low price(check first page of this thread.) We started building the kits several years ago and they have provided great enjoyment and a wealth of knowledge of model building and the activity of swing control model flying.

Here are the two much modified Goldwings today. Check a couple pages back to see about the construction of them: about 7 posts down.
http://balsamodels.com/phpBB/viewtopic.php?f=2&t=2251&start=45

SC_03-01-18aSm.JPG


The two Goldwings in flight this afternoon.

SC_03-01-18bSm.JPG


SC_03-01-18cSm.JPG


Al
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby Scott » Sun Mar 04, 2018 4:44 pm

Very nice,Al.
Hawker Sea Fury FB.11 VF-871
Royal Canadian Navy
Scott
 
Posts: 159
Joined: Mon Feb 15, 2010 10:57 am
Location: Ontario,Canada

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Tue Mar 06, 2018 12:52 am

Thank you, Scott, for your comment. I see in the Goldwing build thread that you are building Flyboy. I'm interested in seeing how it goes for you. If you browse thru this thread, you will notice that I have built a few of them over the past few years and them have worked out quite well for me.

Al
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Fri Apr 06, 2018 5:00 pm

Stuff has become sorta busy since our last post. One is a birthday gift of a refurbished laptop from my wife. It is super fast compared to the old destop we were using before, but this newer windows 10 is a lot different than the XP we were using and is a bit of getting the hang of it.

Since the Gold Wing, we've renewed an interest in a couple of other models in this thread, the Super Cloudbuster and the Droop Snoot.

The Super Cloudbuster was a kind of improved hybrid of the modified Flyboy and Clooudbuster keeping it as simple as possible.
For anyone interested click on the link http://balsamodels.com/phpBB/viewtopic.php?f=2&t=2251 and go about four posts from the bottom of the page.

After building a few variations of the Cloudbuster and Airboy, we decided to make a scratch built original using much of the general arrangement and named it the Droop Snoot'. More info about Droop Snoot athttp://balsamodels.com/phpBB/viewtopic.php?f=2&t=2251&start=30 about two posts down,

Both fly well and are a lot of fun in the back yard.

Al
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Re: CloudBuster and Flyboy - an evolutionary experience.

Postby simpleflyer » Sat Apr 14, 2018 1:36 pm

Looking thru our Cloud Buster and Fly Boy pictures and found some of the Fly Boy that hadn't been posted before. A while back, we had some extra rib sets and were curious how a long winged Fly Boy wing would fly. The wing was extended to 40 inches and mounted to a stick fuselage. The model turned out to be a graceful and gentle flyer in our limited backyard flying space.

More information on the building of the 40 inch wing may be found at the webpage a few posts down.
http://www.stickandtissue.com/cgi-bin/yabb2/YaBB.pl?num=1273164221/405

Al

[img]
SC_04-16-15b.JPG
[/img]
[img]
SC_04-18-15b.JPG
[/img]
[img]
SC_05-26-15-b2c.jpg
[/img]
You do not have the required permissions to view the files attached to this post.
simpleflyer
 
Posts: 476
Joined: Wed Apr 25, 2007 12:51 pm
Location: Rosenberg, Texas

Previous

Return to General Building Questions

Who is online

Users browsing this forum: Bing [Bot] and 5 guests