First, don't glue the nosecone on.
If you need to do some final balancing adjustement, just add clay to the inside of the nosecone. works great.
My balance tips
3 posts
• Page 1 of 1
My balance tips
by Squishyp38 » Mon Feb 28, 2011 4:40 pm
If your model has a nosecone, than my tip will be helpful. if not, then too bad!
First, don't glue the nosecone on.
If you need to do some final balancing adjustement, just add clay to the inside of the nosecone. works great.
First, don't glue the nosecone on.
If you need to do some final balancing adjustement, just add clay to the inside of the nosecone. works great.
The P-38 is arguably the best... Forget that, it is THE BEST fighter of world war two, and is epically AWESOME!
Squishyp38
Squishyp38
- Squishyp38
- Posts: 240
- Joined: Sun Feb 27, 2011 8:08 pm
- Location: Top Secret
by Squishyp38 » Thu Mar 03, 2011 2:57 pm
bump
The P-38 is arguably the best... Forget that, it is THE BEST fighter of world war two, and is epically AWESOME!
Squishyp38
Squishyp38
- Squishyp38
- Posts: 240
- Joined: Sun Feb 27, 2011 8:08 pm
- Location: Top Secret
by frankben » Fri Mar 18, 2011 8:16 am
if your nosecone is already glued on then take an injection needle and inject layers of woodglue in the nose untill you have the right weight.
To build scale balsa planes you don't have to be crazy but it does help a lot!
- frankben
- Posts: 22
- Joined: Sat Mar 12, 2011 5:40 pm
- Location: Flanders, Maarkedal, Belgium
3 posts
• Page 1 of 1
Return to General Building Questions
Who is online
Users browsing this forum: No registered users and 19 guests