Looking to buy a GOOD hobby knife set

Ask other modelers for a little help / knowledge ?

Looking to buy a GOOD hobby knife set

Postby Deadstick Dave » Sat Feb 26, 2011 3:00 pm

The deluxe Exacto knife set w/box did not meet my expections.

Would someone please recommend a good quality set?

Deadstick Dave
Deadstick Dave
 
Posts: 26
Joined: Mon Feb 07, 2011 2:04 pm
Location: Spanaway, WA USA

Postby Xanadu » Sat Feb 26, 2011 10:17 pm

What expectations did it not meet? Give us some idea of exactly what your looking for, we might know of it.
Xanadu
 
Posts: 497
Joined: Wed Sep 27, 2006 9:48 pm
Location: Anola, MB, Canada

Postby Deadstick Dave » Sun Feb 27, 2011 9:20 am

Xandau:

The deluxe Exacto set was very cheaply made with lots of design flaws:

- the moulded trays readily fall out when the chest lid is opened

- the knives are very difficult to remove from the molded chest trays.

- the spare blades fall out of the chest when the lid is opened. (There is no means to retain them)

- the manufacturing quality of the individual tools is not that of Exacto tools of the past.

I view my tools as an artist views his brushes; only the best will do. Ask any surgeon about the importance of good operating tools.

Deadstick Dave
Deadstick Dave
 
Posts: 26
Joined: Mon Feb 07, 2011 2:04 pm
Location: Spanaway, WA USA

Postby SteveM » Sun Feb 27, 2011 10:58 am

Deadstick Dave wrote:I view my tools as an artist views his brushes; only the best will do. Ask any surgeon about the importance of good operating tools.
If that us the case then the best place that comes to my mind is Lee Valley Tools.
SteveM
 
Posts: 498
Joined: Wed Oct 24, 2007 1:06 pm
Location: Beaverton, OR

Postby Deadstick Dave » Mon Feb 28, 2011 10:54 am

PROBLEM SOLVED!

I managed to acquire a 50's vintage Exacto knife set in a wooden chest so I now have a quality set of building tools.

The set is complete and in very good condition including the original Exacto decals.

Deadstick Dave
Deadstick Dave
 
Posts: 26
Joined: Mon Feb 07, 2011 2:04 pm
Location: Spanaway, WA USA


Return to General Building Questions

Who is online

Users browsing this forum: Google [Bot] and 19 guests