Guillow's Model Builders Forum

a place to talk planes !!

Skip to content

Dissolving glue on balsa?

Ask other modelers for a little help / knowledge ?
Post a reply

Dissolving glue on balsa?

Postby camper66 » Tue Nov 30, 2010 10:09 pm

I have accidentally glued a piece in the wrong place. It is very tightly glued into place and I need to remove it to flip it around. I used Zap CA to put it in place. Is there anything I can use to loosen the glue enough to remove the piece?? Thank you for any help.
camper66
 
Posts: 5
Joined: Sat Aug 21, 2010 11:56 am
Top

Postby dbcisco » Tue Nov 30, 2010 10:48 pm

Use CA debonder or nail polish remover. That will usually work on CAed wood and metal.
A bumblebee isn't supposed to fly but does.
My plane is supposed to fly but doesn't.
Balances out doesn't it : )
dbcisco
 
Posts: 209
Joined: Fri May 30, 2008 8:34 am
Location: Lansdale, PA
Top

Postby camper66 » Wed Dec 01, 2010 7:11 pm

Well, I got some CA debonder and worked slowly prying it off as it dissolved the glue and it worked. Thankfully, this part of the plane will be covered by the engine. Thanks for the suggestion.
camper66
 
Posts: 5
Joined: Sat Aug 21, 2010 11:56 am
Top
Post a reply

Return to General Building Questions

Who is online

Users browsing this forum: No registered users and 87 guests

Powered by phpBB® Forum Software © phpBB Group Install phpBB
cron